PLC OMRON CJ1W-ID211
Model : CJ1W-ID211
24V DC 7mA
Class 2 only
PLC OMRON CJ1W-ID211 (24 VDC, 16 Points)
|Name||16-point DC Input Unit with Terminal Block|
|Rated Input Voltage||24 VDC|
|Rated Input Voltage Range||20.4 to 26.4 VDC|
|Input Impedance||3.3 kΩ|
|Input Current||7 mA typical (at 24 VDC)|
|ON Voltage/ON Current||14.4 VDC min./3 mA min.|
|OFF Voltage/OFF Current||5 VDC max./1 mA max.|
|ON Response Time||8.0 ms max. (Can be set to between 0 and 32 ms in the Setup.) *1|
|OFF Response Time||8.0 ms max. (Can be set to between 0 and 32 ms in the Setup.) *1|
|Number of Circuits||16 (16 points/common, 1 circuit)|
|Number of Simultaneously
|100% simultaneously ON (at 24 VDC) (Refer to the following illustration.)|
|Insulation Resistance||20 MΩ min. between external terminals and the GR terminal (100 VDC)|
|Dielectric Strength||1,000 VAC between the external terminals and the GR terminal for 1 minute at a leakage current of
10 mA max.
|Internal Current Consumption||80 mA max.|
|Weight||110 g max.|
The signal names of the terminals are the device
The device variable names are the names that use
“Jxx” as the device name.
|External connection and
Polarity of the input power supply can be connected in either direction.
The signal names of the terminals are the device variable names.
The device variable names are the names that use “Jxx” as the device name.