รายละเอียด
PLC OMRON CJ1W-ID231
PLC OMRON
Model : CJ1W-ID231
Name | 32-point DC Input Unit with Fujitsu Connector | |
---|---|---|
Model | CJ1W-ID231 | |
Rated Input Voltage | 24 VDC | |
Rated Input Voltage Range | 20.4 to 26.4 VDC | |
Input Impedance | 5.6 kΩ | |
Input Current | 4.1 mA typical (at 24 VDC) | |
ON Voltage/ON Current | 19.0 VDC min./3 mA min. | |
OFF Voltage/OFF Current | 5 VDC max./1 mA max. | |
ON Response Time | 8.0 ms max. (Can be set to between 0 and 32 in the Setup.) * | |
OFF Response Time | 8.0 ms max. (Can be set to between 0 and 32 in the Setup.) * | |
Number of Circuits | 32 (16 points/common, 2 circuits) | |
Number of Simultaneously ON Points |
75% (12 points/common) simultaneously ON (at 24 VDC) (Refer to the following illustration.) | |
Insulation Resistance | 20 MΩ min. between external terminals and the GR terminal (100 VDC) | |
Dielectric Strength | 1,000 VAC between the external terminals and the GR terminal for 1 minute at a leakage current of 10 mA max. |
|
Internal Current Consumption | 90 mA max. | |
Weight | 70 g max. | |
Accessories | None | |
Circuit Configuration |
![]() The signal names of the terminals are the device variable names. The device variable names are the names that use “Jxx” as the device name. |
![]() |
External connection and terminal-device variable diagram |
![]() The input power polarity can be connected in either direction. Be sure to wire both pins A9 and A18 (COM0), and set the same polarity for both pins. Be sure to wire both pins B9 and B18 (COM1), and set the same polarity for both pins. The signal names of the terminals are the device variable names. The device variable names are the names that use “Jxx” as the device name. |
สอบถามรายละเอียดเพิ่มเติมได้ที่
โทร. 064-1969060 หรือ 02-9444511
E-mail : kessarin@a-automation.co.th, sales@a-automation.co.th
Line : a-automationonline, @a-automation2
FACEBOOK FANPAGE คลิก
รีวิว
ยังไม่มีบทวิจารณ์